| | No.1 purposes
CGBPJ series of stripped Machine is usedfor fastening the joints
falling off conveyor belts andcleaning the head Adhesive Layer,
this operation can beused in various occasions and locations. The
productsare widely used in the following industries, such aspower
plants, mining, steelworks, wharf, petrochemical,etc.
No.2 Product Advantages
1. Stripping large area, speed, greatlydecreases labor intensity
and reduces the time requiredfor connector;
2. Light in weight, carry easily;
3. Operate Stably.
No.3Technical Parameters
1. Motor power: 0.75 KW
2. Linear velocity: 0.3 m / s
3. The largest Stripped width: 200 mm (NN, EP Conveyor belt and
wire rope conveyor belt) 400 mm(general belt)
No.4Methods of Usage
1. By conventional method, please put theconveyor belt on the
centerline, and the correspondingjoint should be incised with
knife, and then separatethe first layer;
2. Put the conveyor belt stripped machineon an appropriate location
and fix well by wire rope;
3. Connect with power supply;
4. Clamp the first layer with Fixture,start motor and incise the
stripped part properly.
5. After stripped the first layer, andrepeat the above steps, strip
the second and thirdlayers.
No.5Attention to the issues
1. Power should be connected and operatedby a professional
electrician.
2. Peeling machine shouldbe fixed as working, and prevent sliding.
3. Not exceedthe relevant width as required. |
